Description:
- Aluminum alloy for protection in brackish or saltwater
- Pressure DieCast to meet highest Mil-Spec standards
- disc line cutter — guarding your boat against the hazard of propeller entanglement
- two precisely sized halves that fasten around the shaft for best protection and to eliminate the risk of spinning
- Designed by divers for easy installation
This Sacrificial Anode Line Cutter Assemply (SALCA) solves two major problems: line entanglement and galvanic corossion. The aluminum alloy metal helps protect the marine craft from corrosion in brackish or salt water, while the stainless steel cutting edge slices through lines guarding the boat against propeller entanglement.
Designed by divers for divers this sacrificial anode is a convenient and economical alternative to other line cutters because it doesn’t require mounting by professionals.
It is composed of two sized halves that fasten around the propeller shaft which eliminatees spinning under pressure. Conformed to the highest MIL-A-24779 standards for the worlds best protection.
| Part No | Shaft Size | Thickness | Outside Dim | Weight(lb) |
|---|---|---|---|---|
| SALCA-0750-ALU | 3/4″ | 1-1/4″ | 2″ Anode – 2-1/2″ Blade | 0.29 |
| SALCA-0875-ALU | 7/8″ | 1-1/4″ | 2″ Anode – 2-1/2″ Blade | 0.31 |
| SALCA-1000-ALU | 1″ | 1-1/2″ | 2-1/4″ Anode – 3″ Blade | 0.47 |
| SALCA-1125-ALU | 1-1/8″ | 1-1/2″ | 2-1/2″ Anode – 3-14″ Blade | 0.53 |
| SALCA-1250-ALU | 1-1/4″ | 1-1/2″ | 2-1/2″ Anode – 3-1/8″ Blade | 0.52 |
| SALCA-1375-ALU | 1-3/8″ | 1-1/2″ | 2-3/4″ Anode – 3-1/4″ Blade | 0.65 |
| SALCA-1500-ALU | 1-1/2″ | 1-1/2″ | 3″ Anode – 3-1/2″ Blade | 0.70 |
| SALCA-1750-ALU | 1-3/4″ | 1-1/2″ | 3-3/4″ Anode – 4-9/16″ Blade | 1.11 |
| SALCA-2000-ALU | 2″ | 1-1/2″ | 3-3/4″ Anode – 4-9/16″ Blade | 1.00 |
| SALCA-2250-ALU | 2-1/4″ | 1-5/8″ | 4″ Anode – 5″ Blade | 1.23 |
The SALCA by Sea Shield Marine combines an anode with a line-cutter providing dual protection for your prop shaft driven vessel.
- Easy size verification inside and outside.
- Easy installation-deep slotted stainless steel machine screws for maximum torque.
- Stainless steel allen cap screws available upon request.
- Innovative O-rings keep screws from falling out.
- Individually boxed with foam insert for safety.
Dual protection below the waterline
The SALCA (Sacrificial Anode Line Cutter Assembly) is the first unit to combine a sacrificial anode and disc line-cutter to give you dual protection against corrosion and propeller entanglement. By combining an extremely durable stainless steel disc line cutter to our already reliable MIL-SPEC anodes we were able to eliminate the difficult installations and constant maintenance headaches associated with traditional line-cutters. With the SALCA, you get an all-in-one unit that’s easy to install, requires no maintenance and is made with the highest quality materials.
The SALCA uses only the highest quality materials and alloys to make sure that you have a durable unit that will stay efficient through the life of the product. The SALCA is made up of 2 parts – 1) a MIL-SPEC standard pressure die-cast anode, and 2) an extremely durable disc line-cutter.
SALCA Frequently Asked Questions:
”How does the SALCA work?”
Simple, we’ve combined a disc line-cutter with a high-quality anode, to give boat owners better protection and less hassle. It’s not rocket science but here are the details…
The SALCA is comprised of 2 parts: 1) A high-quality, pressure die-cast zinc or aluminum anode 2) An extremely durable Stainless Steel Disc Line-Cutter. These 2 parts combine to create a highly durable and super effective unit that’s easy to install and maintenance free while giving you dual protection against corrosion and propeller entanglement.
Where does the SALCA install?
The SALCA should fit easily on most props where you would usually put a Limited Clearance Collar Anode.
Do I need to adjust the gap between the strut and hub to fit the SALCA?
The short answer is NO. We designed the SALCA to fit where most Limited Clearance Collar anodes will go. We don’t like the idea of increasing the gap between the strut and the hub, because it increases the danger of causing damage or even breaking the prop.
Does the SALCA come in Zinc, Aluminum, and Magnesium?
As of the moment, the SALCA is only available in Zinc and Aluminum.
What kind of maintenance does the SALCA require?
The SALCA requires very little to no maintenance at all. The SALCA's combination of an extremely durable cutting-blade and a high-quality anode is meant to be a low maintenance, no hassle solution to the usual difficult and maintenance heavy issues that come with traditional line-cutters – no sharpening, no difficult installation, no constant maintenance. Just treat it like you would a regular limited clearance anode; install it properly, keep it clean, and let the SALCA do its job by giving you the dual protection of an anode plus a line-cutter.
Will the SALCA still have the same cutting power after the anode deteriorates?
This is a great question! At Sea Shield Marine we’ve been creating the best anodes on the market for over 40 years and it really shows the quality of the SALCA. Like all our collar anodes the SALCA is designed with a tighter tolerance to prevent spinning and is pressure die cast to make sure it wears evenly. No line-cutter can ever guarantee 100% protection – that’s just a fact, but we can assure you that the SALCA will perform consistently over the life of the anode. Just remember to change out the SALCA regularly – as you would with any anode.
Can I use multiple SALCA's on the same prop?
Absolutely! Yes, you can. Since you never know when and how entanglement will occur – you can add to your peace-of-mind by adding a second SALCA on the shaft. Example: SALCA #1 is installed right behind the Prop, while SALCA #2 is installed directly on the Prop Shaft. Now you have quadruple protection! Hey, when it comes to prop protection is there really a such thing as too much protection? We’ve seen this type of installation done before with great results.
WARNING! If you have a wooden boat hull be aware of “over-zincing” which could lead to passivation.
Is the SALCA cheaper than a traditional line-cutter?
We don’t like the word “cheap”. We like to say the SALCA is more “cost-effective”. Not only does the SALCA provide the same protection of a traditional line-cutter, but you also get the added benefits of corrosion protection from the high-quality anode – which you need to install anyway. When you add up the difficult installation and the ongoing maintenance of a traditional line-cutter – you could install multiple SALCAs and still come under the cost of most line-cutters.
Is the SALCA easy to install?
Yes, it’s very easy to install. You don’t need to be a professional to put this baby on. The SALCA comes in 2 parts and uses 2 simple screws (slotted fillister or Allen key) to install. If you can install an anode, you can install a SALCA.
When should I change out the SALCA?
Change it out like you would any anode on your marine vessel. We can’t give out exact time periods since the longevity of your anodes is relative to the waters you frequent.
What does SALCA mean?
Superior Alien Light Cutting Array!!! kidding . . . Sacrificial Anode Line Cutter Assembly. It also means dual protection against corrosion and propeller entanglement.